Outsourced Manufacturing

Quality outsourced manufacturing services are provided to Customers in the Curtain Walling, Caldding Sector as well as in the Construction Sector in line with their demands.

We may state our services as follows:

• In case if needed preparing workshop drawings
• Aluminum Joinery Manufacturing,
• Conventional Capped and Structural Silicone System Facade Manufacturing,
• Modular System  Facade Manufacturing,
• Aluminum Plate, Stainless Plate, Composite Plate Cuting, Dimensioning, Jointing and Bending,
• Aluminum Plate Perforating,

Each item is carefully manufactured , packed and made ready to be delivered to site.

Stick System Facades

Mullions and transoms made out of Aluminium Profiles are processed at factory and installed on site.

Glazing process shall take place by means of pressure plate as well as structural silicone and all components of the facade are assembled on site.

Installation process requires longer time and workmanship on site.

Modular System Facades

Mullions and transoms generally custom designed, are processed to form panels, glazed and finished at the factory and made ready to install on site with all the componenets.

Since the facade works are totally completed  following the erection of pre-fabricated panels, modular system facades are requiring less time and workmanship and are more cost effective.

Point Supported System Facades

Point Supported system facades are generally applied on lobbies, atriums, where glazing loads are transferred by point bearers to glass or steel columns or to cables.

These type of facades are moden facades and require high technology but they allow bigger sizes of glazing so permit to create maximum visibility.

Skylights

In comtemporary architecture, skylights  are glass roofing systems that are contructed with the aim of providing more sunlight and maximum visibility in open spaces such as atrium and lobby.

Especially water permeability, heat, sound and solar factors play an important role at design stage.

Sun Breakers

Sun breakers are movable or fixed building elements, attached to curtain walls, that are used in contemporary architecture to increase comfort conditions in living spaces against solar effects.

The components of sun berakers are made of aluminium profiles and they are produced as single or panelled elements.

Joineries

Joineries are the building elements formed using aluminum profiles in order to protect the buildings from heat, water penetration, solar factors and to provide both access and visibility.

Depending on architectural requirements, double opening, sliding etc. various types are available.

Double Walls

Double walls are both architecturally l and functionally designed facade types located in front of the primary  facade.

They usually move away from the existing facade by a cat wall or consoles. Glass, metal plate, aluminium profiles or sunscreens are  used as facade cladding elements.

Cold Facades Cladding

They are applied to cold facades generally for architectural purposes and produced using aluminium composite panel, aluminium plate, stainless steel plate etc.

They can be used at different colour, thickness and patterns.

Perforated Metal, Expended Metal Cladding

They are the facade cladding elements used within both cold facades, curtain walls and double walls.

Perforated aluminium or stainless steel plate or panellised expended metal are used at the patterns formed according to architectural prefrences.